Auto-Zone Control Systems Auto-Zone CV-C Controller Installation Guide (Version 01A) - Manual (Page 35)

Auto-Zone CV-C Section 2
Sequence of Operation 2-25
Static Pressure Sensor Static Pressure Sensor Static Pressure Sensor Static Pressure Sensor
You can install a Static Pressure Sensor on the fixed Analog Input labeled Pressure
Sensor and be provided automatically with the current static pressure. This is a status
only reading that can be used to verify fan operation if you are viewing this system with
the ZoneView AZ computer program. No setup or programming is required. If the input
detects the sensor, you will see the reading.