Avalon Firestyles 616 GSR 1-Piece Surround Panel - Manual (Page 3)

616 / 430 GSR 1-Piece Surround Panel
Installation Instructions
(See SKU’s Below)
Page 3 of 4 17601686.docx — 4/19/13 © Travis Industries, Inc.
4 Install six screws (included with the insert) to the sides of the inserts, 3 on each side, as shown
below. Leave a ¼” gap between the screw head and the insert, the surround panel will hang on
these screws.
5 Slide the surround panel into position as shown below. The notches on the sides of the
surround panel fit over the 6 screws installed previously. Tighten the screws to secure the
panel.
1/4”
Screw
locations