Andirons, Ac d e f – Avalon Firestyles Andirons User Manual
Page 4
Andirons
(see part numbers below)
Page 4 of 5
17601412 - 11/20/12
© Travis Industries, Inc.
864 ST Installation
Install the andirons after installing all other optional equipment (firebacks, accent light, etc)
but before installing the logs.
b
Lift up on the
burner and slide
the upper portion
of the bracket into
the gap between
the burner and
grate.
Disassemble one of the andiron
brackets.
a
c
d
e
f
Pull on the
bracket so it
is all the way
forward.
Attach the andiron (with
bracket) to the bracket on
the fireplace using the
screws removed in step “a”.
You may need to bend the
bracket slightly to allow the
andirons to stand vertically.
5/32” Hex
Wrench
Repeat steps “a” through “e”
for the opposite side.
Attach the andiron to the
lower portion of the
bracket with the included
screw (use the included
5/32” hex wrench).