Avalon Firestyles 864 HO NB Ember-Fyre Burner W/ Lodge Pine Logs - Manual (Page 10)

864 HO NB Ember-Fyre Burner W/ Lodge Pine Logs
Installation Instructions
(SKU 96900144)
Page 10 of 10 17601715.docx — 8/8/12 © Travis Industries, Inc.
Ember Installation
Install the embers as shown below. Make sure to cover the screws on the burner and any fireback seams
with embers to create an aesthetic firebox.
Rock Wool Installation
The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock
wool works best when it is applied in a very thin, porous layer. The best method for applying the
rock wool is to brush it on to the burner. Compress a clump of rock wool between your thumb and
forefinger. Use a stiff brush to apply a thin layer of rock wool fibers onto the burner. Do not use the
entire bag of rock wool. Use only a small amount and save the remainder. Over-use of rock wool will
diminish the glow and may cause sooting or other adverse conditions.