Avalon Firestyles 864 HO NB Dancing-Fyre Burner - Manual (Page 2)

864 HO NB Dancing-Fyre Burner
Installation Instructions
(sku: 96900141)
Page 2 of 11 17601701 — 2/27/14 © Travis Industries, Inc.
Installation Warnings
The logs are fragile, especially after being exposed to heat.
Make sure the gas control valve is OFF and the heater is cool before servicing.
Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
The burner must be correctly positioned before installing the logs. Make sure the burner is
fully seated and the pilot is properly aligned.
Burner Installation
NOTE FOR OLDER 864 HO NB UNITS
Older units were shipped with front and side burner skirts pre-installed. Remove these skirts before
proceeding.
Remove the 7 screws holding the front and side burner skirts in place. The skirts may be discarded (keep
the screws).
Make sure to replace the 4 screws (2 each side) that held the side burner skirts in place (plugging the holes
in the valve tray).
NOTE FOR OLDER UNITS WITH SIT PILOT ASSEMBLY
If you have an older unit with a SIT pilot assembly (see picture to
the right), you will need to replace the 2-way pilot hood with a SIT
3-way pilot hood (order part # 250-02205).
Side Burner Skirt
Front Burner Skirt
Side Burner Skirt