Avery Dennison Sierra Sport3 9433 Quick Reference - Manual (Page 2)

2
To check the battery:
The battery status flashes briefly
when you turn on the printer. If
the printer is already on, press
A under p. To return to Ready
Mode, press A under R.
S l e e p M o d e
If this option is enabled, the printer goes into sleep mode when it is
inactive for a period of time to conserve battery power. The printer
displays a coffee cup icon when it is in sleep mode. To wake the
printer, press any button except the power button (
P). Refer to the
System Administrator’s Guide for more information on enabling and
disabling sleep mode.
C o n n e c t i n g t h e C o m m u n i c a t i o n s C a b l e
1. Open the hinged cable door by loosening the Philips screws and
lifting up on the door.
2. Plug one end of the cable into the printer port and plug the other
end into your computer port.
3. Place the cable in the cable cavity.
4. Close the hinged cable door and tighten the screws.
A USB cable is also available. Refer to the Operator’s Handbook
for more information.
Cable in
Cable Cavity
DB9 Port
DB9
Connector