Avery Dennison FreshMarx 9417 System Administrator Guide - Manual (Page 27)

Editing Product Data 4-5
E d i t i n g t h e U se F i r s t Bu t t o n
You must be in Edit Mode to change the Use First button.
1. Press the Tools button.
2. Press Use First.
*The Alternate Name field is shown if you enable Alternate Button Names (see “Adjusting the
Language Settings” in Chapter 3 for more information). Enter the button’s alternate name as
you want it to appear when the operator presses the Language Toggle Button .
3. Enter the Button Name.
4. Enter the Label Data. This field is printed on labels when the Use First
button is pressed. If this field is left blank, the default text “Use First”
prints on labels.
Note: This field has a maximum of four words.
5. Click Save to save the changes or Cancel to exit.
Note: The “Use First” Button Name, “Use First” Alternate Name, and Label
Data fields have default values. You can press the

to clear the field then click Save
to use the default values.
BEST
BEFORE
07/01/13 2:20 PM
*Opti onal Fi el d