Avery Dennison ALX 720 - Manual (Page 27)

Operators Manual
ALX 720
4/09 Page 27 Operation
4. Operation
CAUTION! - Be careful on operation, fingers, hair, clothes, jewellery, etc. may
be caught by and get into rotating axles.
4.1 Insert label material
CAUTION! - Insertion/exchange of foil and material should be carried out only
by especially instructed personal.
Before threading the new material, the waste paper should be removed. In the printer the old
material can be removed by
y
pressing the red lift lever and drawing the material backward.
y
pressing the ON/OFFLINE and NEXT key simultaneously the material will be transported
backward.
Threading of the label material is shown down below on the threading diagrams for the
right-hand and the left-hand version.
Stuck to the side plate of the 720 is the threading diagram, which shows the correct mounting
of the label web.
left hand version right hand version
Figure 11 Threading diagram