Avery Dennison 6035 System Administrator Guide - Manual (Page 4)

4 Using the ADK Interpreter
To enable or disable internal fonts:
1. From the MAIN MENU, press * or = until you highlight
Configuration. Then, press e. You will see:
2. Press * until you highlight Fonts. Then, press e. You will
see:
3. Press * until the font you want to set appears. Then, press
e. You will see the current status (enabled or disabled):
4. Press * to disable the font or = to enable it. Then, press
e.
5. Press * to continue in the font list (or = to go backward).
6. When finished, press b to return to the CONFIGURATION MENU.
7. Reboot the printer.
When you start your application the first time, the printer loads only the
fonts you have enabled.
CONFIGURATION MENU
Backlight
On-Demand
Clock/Calendar
Font
Font-1000
Font-1008
Enable