Avery Dennison 9850 RFID Multi-Protocol - Manual (Page 22)

2-10 Multi-Protocol Encoding
Protocol
The multi-protocol printer supports the following UHF protocols:
♦ Class1 Generation 1 96-bit
♦ Class1 Generation 1 64-bit
♦ UCODE Version 1.19
♦ Impinj 0+
♦ Matrics DEMO (Matrics 0+)
♦ Class 1 Generation 2 (Gen 2)
Matrics 0+ and Impinj Gen 2
protocols are only included for demo
purposes. Contact your RFID Account Manager to obtain Matrics 0+ and
Impinj Gen 2 supplies in limited quantities for demo purposes.
After you select a different protocol, you are prompted to enter the new
Read and Write Power settings. Refer to the RFID Setup Guide & Supply
Chart provided with your printer for more information about those
settings. To change the setting, from the Main Menu, select Setup, then
RFID. Then follow these steps.
1. Press or until you see
RFID
Protocol
2. Press Enter/Pause. The current setting is displayed, for example:
PROTOCOL
Class1
96
3. Press or to change the protocol. After you display the option
you want, press Enter/Pause.