Aviosys 9216 - Manual (Page 9)

IP SENSOR 9216 USER MANUAL
4. tware installation Hardware & Sof
Before you star to use IP SENSOR 9216, please follow the steps below
o make sure the contents is complete.
ure it is AC 110-240 volt
Check the package t
prepare one Ethernet HUB or Router
Check the voltage of the power supply to make s
Hardware installation
1 to HUB through network wire.
3 Connec
Connect the power adapters of under control electric equipment to corresponding
out port of 9216.
Connect the 9216
2 Connect the HUB or Router to the internet (May through ADSL/XDSL modem).
t the power adapter to the 9216.
4
* 9216 HUB XDSL or * 9216 HUB / ROUTER XDSL
Turn on your computer and the power adapter of IP SENSOR 9216.
Softw
Havin 6, please install the software as
the follow steps:
1. Start your computer, put the install disc in the CDROM, and then find the file named ipedit.exe in the
install disc.
2. Copy the file to desktop or any directory you want save to.
Start the initial setting process following the construction in next section.
are installation
g connected the power supply and network wire with RJ45 port to the 921
- 8 -