N projection setup – Awind iShow / DHP-2010C User Manual
Page 20
User’s Manual
20
- -
disable DHCP on iShow is another DHCP server is detected, otherwise it will
enable its DHCP service.
♦
Start IP: The start IP address of DHCP Server.
♦
End IP: The end IP address of DHCP Server.
< Wireless Setup>
♦
Wireless LAN: you can select “Enable” or “Disable”
♦
Region: default value is “Worldwide”.
♦
SSID: SSID string, max. Length is 32 bytes.
♦
SSID Broadcast: you can select “Enable” or “Disable”
♦
Channel: to set fixed channel or Auto. The “Auto” means after power on
iShow, it will scan all of wireless channel and select clear one channel
automatically.
♦
WEP: you can Disable WEP key or select one of 64bit or 128bit in ASCII or
HEX string.
♦
Key: If WEP is enabled, you have to set key value according to WEP mode
you selected.
<Apply >: press button to select this mode
<Cancel>: press button to abort action.
<Back>: Back to Operating mode main menu
n Projection Setup
*** Click [Projection Setup] button
<Resolution>: XGA (1024*768) or 720P.