Awind iShow / DHP-2010C - Manual (Page 5)

User’s Manual
5
- -
2 Quick Start
n Connect the power adaptor to your iShow, and plug the adaptor to your
power outlet.
n Connect the VGA output on the iShow to your TV or projector, and turn on
your projector or TV.
n Plug your LAN cable into iShow if you want to use it as a wireless access
point (AP).
n Turn on iShow device. The Main Menu as below will be shown on your TV
screen while system is ready.
(Click the Info button on iShow Remote to check system info.)
n Make sure your PC WLAN or LAN interface is enabled and connect your PC
to iShow (wireless default SSID is iShow).
n Install iShow software from the CD-ROM.
n (Make sure this application is allowed to pass your personal firewall.)
n Launch iShow utility. The iShow application automatically will search for a
iShow server and will establish connection automatically.
If there are more than one iShow servers, you can select specific server