Awind wePresent WiPG-910 User's Manual - Manual (Page 38)

38
<
Auto-Configuration Network Setup
>
The default setting of the wePresent box is DHCP client. When the wePresent box
is connected to a LAN that already has a DHCP server present, the wePresent box
takes an IP address assigned to it by the server. When the wePresent box is
connected to a LAN that does not have a DHCP server, the wePresent box becomes
the DHCP server in the network.
< IP Setup>
♦ You can select “obtain IP address automatically” or “Use the following IP
address”
♦ IP Address: The default value is 192.168.100.10.
♦ Subnet Mask: The default value is 255.255.255.0
♦ Default Gateway: The default value is 192.168.100.10
♦ DNS Server: The default value is 192.168.100.10
<DHCP Server Setup>
♦ You can select “auto(Enable/Disable DHCP Server” or “Disable”)
♦ Start IP: The start IP address of DHCP Server.
♦ End IP: The end IP address of DHCP Server
♦ Subnet Mask: The default value is 255.255.255.0
♦ Default Gateway: The default value is 192.168.100.10
♦ DNS Server: The default value is 192.168.100.10
< Wireless Setup>
♦ Wireless LAN: The default value is “Enable”
♦ Region: default value is “Worldwide”.
♦ SSID: SSID string, max. Length is 32 bytes.
♦ SSID Broadcast: The default value is “Enable”
♦ Channel: to set fixed channel or Auto. The “Auto” means after power
on wePresent , it will scan all of wireless channel and select clear one
channel automatically.
♦ Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit
or 128bit in ASCII or HEX string.
♦ Key: If Encryption is enabled, you have to set key value according to
the encryption mode you selected.
< Gatekeeper>
Gatekeeper is designed for ensuring the enterprise network security within
wePresent box
♦ All Block can block Guest Users(through wireless) to access all office
network(LAN),
♦ All Allow can pass Guest Users(through wireless) to access all office
network