Baby Lock EmbroideryPro_BMP8_InstructionRef (BMP8) Instruction and Reference Guide - Manual (Page 229)

APPENDIX —————————————————————————————————————————————————————
212
More than 501 thread color
changes are being specified in
the pattern.
Up to 501 thread color changes
can be specified in a pattern.
The embroidery data cannot be
detected.
The embroidery data may be
damaged.
USB media error
Touch
, and try again. Or
the USB media may be dam-
aged.
USB media is not connected to
the machine.
Connect a USB media.
During data transfer, the USB
cable was disconnected.
Do not disconnect the USB
cable while data is being trans-
ferred. (Refer to page 114.)
A wiper error occurred.
The thread is entangled on the
wiper, remove the thread.