Thread overlock-wide – Baby Lock Imagine Wave (Previous Model) (BLE3ATW) Instruction and Reference Guide User Manual
Page 22
3
T
H
R
E
A
D
O
V
E
R
L
O
C
K
20
3-Thread Overlock-Wide
A
B
A
B
C
D
B
C
D
O
O
A
The 3-thread overlock wide stitch is perfect for edge-finishing most
woven fabrics and for seaming knits that do not require the extra dura-
bility that a fourth thread provides.
It's easy to convert your Imagine Wave to serge with 3 threads by sim-
ply eliminating either needle.
To convert your serger to a 3-thread overlock wide (5.5-7.5mm), cut the
needle thread just above the needle eye (fig. A). Remove the right
needle and thread completely from the machine. Re-tighten the nee-
dle clamp screw slightly to prevent the screw from working out (fig. B).
Move the stitch selector lever to "A".
For left needle, 3thread overlock, follow the suggested settings and the
threading diagram below.
NEEDLES
left
LENGTH
2-3
WIDTH
7.5
STITCH
SELECTOR
A
WAVE
SELECTOR
O