Baby Lock Imagine Wave (Previous Model) (BLE3ATW) Instruction and Reference Guide - Manual (Page 23)

3
T
H
R
E
A
D
O
V
E
R
L
O
C
K
21
3-Thread Overlock-Narrow
B
A
It's easy to convert your Imagine Wave to serge with 3 threads by
simply eliminating the left needle.
To convert to narrow 3-thread overlock (3.0-5.0mm), cut the left
needle thread (fig. A). Remove the left needle and left needle thread
completely from the machine.
Tighten the needle clamp screw slightly to prevent the screw from
working out (fig. B).
Place needle into right needle clamp position and tighten screw.
Move the stitch selector lever to "B".
For the right needle, 3-thread overlock sewing, follow the suggested
settings and the threading diagram below.
A
B
C
D
B
C
D
O
O
A
NEEDLES
right
LENGTH
2.5-3.5
WIDTH
3.0
STITCH
SELECTOR
B
WAVE
SELECTOR
O