Baby Lock Evolve (Previous Model) (BLE8W) Instruction and Reference Guide - Manual (Page 35)

O
V
E
R
L
O
C
K
S
T
I
T
C
H
E
S
E
X
P
R
E
S
S
33
Seaming Sheers
Lettuce Edge
Belt Loops and Button Loops
A
B
C
Use the 3-thread rolled hem setting when sewing sheer fabrics. Set the stitch length at 2.5. Sew the seams,
aligning the fabric edge with the serger's seam guides, trimming away the excess seam allowance.
A frilly or "lettuce" edge can be created on most light and medium
weight stretch and on bias edges of soft, woven fabrics. It makes
a pretty decorative edging for activewear, lingerie, accessories and
children's wear.
Set the machine for the 3-thread rolled edge.
Set differential feed at 0.6 (fig. B). Sew the fabric in the direction
of greatest stretch-the crossgrain on knits, bias grain on wovens.
For a "leafier" effect, try using a shorter stitch length and gently
stretch the fabric (fig. A) as it is being sewn. Sew a test sample
(fig. C).
Note:To avoid the stitching from pulling away from the fabric,
increase the width to a slightly larger number.
Use the rolled edge thread chain, stitched without fabric, to make profession-
al belt loops and button loops. Using heavier decorative thread gives a
stronger loop.
Returning to Standard Serging
Clear the stitch fingers and return the stitch length dial to the standard range. Set stitch width and length at
the desired settings. Replace the left needle and its corresponding thread, if desired.