Basler Electric BE1-11m - Manual (Page 600)

588 9424200996 Rev L
Software
Version and Date
Change
3.05.03, Feb-14
•
Maintenance release
3.06.00, Apr-14
•
Added support for BE1-11m firmware version 2.08.00
•
Added Switch/Pulse drop-down selection on the Virtual Switches
Control screen
•
Changed the Download button to Refresh and added a Toggle
Sorting button on the Sequence of Events screen and Security
Log screen
Table 205. Instruction Manual Revision History
Manual
Revision and Date
Change
—, Sep-10 •
Initial release
A, Jan-11 •
Added DNP Certification in Section 1
•
Added Figure D-2, Re-Attaching the Front Cover
•
Added RTD Module Communications Setup Procedure in
Appendix E
B, Nov-11
•
Added Isolation under General Specifications in Section 1
•
Added GOST-R Certification in Section 1
•
Replaced Figure 3-5, BE1-11 Connection Screen (Added
Advanced button)
•
Added explanation of IRIG Decoding setting and replaced Figure
4-9, Clock Setup Screen
•
Added information on Output Override Alarms in Section 8
•
Changed listing of Metered Frequency Range from 10-75 Hz to
10-125 Hz in Sections 1 and 11
•
Replaced Figure 11-11, Motor Meter Screen (Added Thermal
Capacity Reset button)
•
Improved Settings Calculation Example in Section 12
•
Added equations for Standard Curve and IEC Curve under 49TC
Time Curves in Appendix A
•
Added UL Approval for hazardous locations in Appendix E
•
Minor text edits and other improvements throughout manual
C, Feb-12 •
Clarified specifications for contact-sensing inputs in Sections 1,
7, and 13
•
Added
® to BESTCOMSPlus® throughout manual
•
Added Advanced Properties and Figure 3-8 in Section 3
•
Clarified equations for 49TC curves in Section 9 and Appendix A
•
Added Application Tips in Section 12
•
Minor edits throughout manual
D, Sep-12 •
Converted manual into new style and structure
•
Added support for BE1-11m firmware version 2.06.00 and
BESTCOMSPlus version 3.00.02
E, Nov-12 •
Added Storage statement in the Quick Start chapter
•
Minor text edits throughout manual
F, Mar-13 •
Added 10-Second Frequency description in the Power Quality
chapter
•
Added case overlap in Figure 164, J Type Case - Cutout and
Drilling Dimensions in the Mounting chapter
•
Added Figure 176, Single-Phase Current Sensing Connections
in the Typical Connections chapter
•
Added Specifications - 25 Hz Operation chapter
•
Added Storage statement in the RTD Module chapter
•
Added Digital Points chapter
Revision History BE1-11m