Baumatic BHS600.5SS - Manual (Page 13)

13
o
If something is spilt onto the plate itself, then it can be removed
onto a kitchen towel and rub it onto the surface of the
plate. The next time the plate is used, it may produce a little
d at larger supermarkets and hardware
stores. The manufacturer’s instructions should be followed when
T: If the solid plates are not maintained
regularly with olive oil or a hotplate conditioner, then they
may rust.
o
Maintaining the solid plates
using a soft brush, plastic or nylon scourer and warm water.
o
To keep the solid plates in good condition, you should put a little
olive oil
smoke.
o
Alternatively you can use a hotplate conditioner; these products
can normally be foun
using these products.
o
IMPORTAN
Installati n
The installation must be carried out by a suitably
ualified person, in accordance with the current
version of the following.
UK Regulations and Safety Standards or their European
o
Building Regulations (issued by the Department of the
Building Standards (issued by the Scottish Development
o
Electricity At Work Regulations.
q
o
Norm Replacements.
Environment).
o
Department).
o
IEE Wiring Regulations.