Baumatic BHS600.5SS - Manual (Page 16)

16
ure that these holes are
not blocked by the work top, when you
opposite).
and
ioned mat.
o
The supplied brackets need to be fitted to
o
Place a bracket onto each corner, ensuring that the outer hole
o
Fasten the bracket to the corner of the hob with a screw.
le on the outer edge of the
bracket but do not fully tighten.
e cut out.
o
When the hob is correctly positioned, tighten the long screws to
o
IMPORTANT: There are ventilation
holes around the outside of the hob.
YOU MUST ens
put the hob into position (see drawing
o
Carefully turn the hob upside down
place it on a cush
each of the four corners on the underside of
the hob.
lines up with the hole on the corner of the hob.
o
Place the long screw into the fixing ho
o
Carefully turn the hob back over and then gently lower it into the
aperture hole that you hav
fix the hob securely in the aperture hole. These screws MUST
be securely tightened.