Baumatic BHC310 User Manual
Page 12
o
A beep will sound each time a touch is registered.
o
You should make sure that the touch controls are always clean
and dry and that there is no object, such as utensils or cloths,
covering them. Even a thin film of water may make the controls
difficult to operate.
Cooking on a zone
o
After powering on the appliance a buzzer will sound once and all
the indicator lights will come on for 1 second and then go out.
This indicates that the hob has entered stand-by mode.
o
Press the ON/OFF button (1) and all the
indicators will show “-“.
o
Place a suitable pan on the cooking zone
that you wish to use. Ensure that the
bottom of the pan and the surface of the
cooking zone are clean and dry.
o
Touch the relevant cooking zone selection button
(3).
o
Choose an appropriate power setting for the food
that you are cooking using the power
regulation buttons (2). If you don’t choose a
power level within 1 minute, the hob will
automatically switch off and you will need to
start again.
12