BECKHOFF AX5801 - Manual (Page 13)

Operation
AX5801 11
3.1.3 Mechanical installation
DANGER
Caution - Risk of injury through electric shock!
Disconnect the servo drive from the mains and system voltage before installing the
TwinSAFE drive option card!
Due to the DC link capacitors, there may still be a potentially lethal voltage on the DC
link contacts X02 even after disconnecting the servo drive from the mains supply. Wait
5 minutes after disconnection and measure the voltage on the DC link contacts DC+
and DC-. The device is safe once the voltage has fallen below 50 V.
Attaching the two plugs to the AX5801 TwinSAFE drive option card
•
Insert the enclosed 4-pin connector (1) into the socket.
•
Tighten the two screws (2).
•
Insert the 6-pin connector (3) into the socket (4).
•
Tighten the two screws (5).
Figure 3-1: Assembling the plug
AX5801 - TwinSAFE Drive Option card
•
Fully release the screw (6).
•
Remove the insert (7) in the direction of the arrow (8).
•
Insert the TwinSAFE drive option card (9) carefully into the opening in the direction of the arrow
(10). The slot has guides for the card on the short sides. Ensure that the card is inserted into
these guides.
Figure 3-2: AX5801 - TwinSAFE Drive Option card
1
2
4
2
3
5
5
6 7
8
11 9
10