BECKHOFF AX5801 - Manual (Page 16)

Operation
14 AX5801
3.2 Maintenance
The TwinSAFE drive option cards are maintenance-free.
WARNING
Observe the specified environmental conditions!
Please ensure that the TwinSAFE option cards are only stored and operated under the
specified conditions (see technical data).
3.2.1 Cleaning
Protect the TwinSAFE Drive option cards against unacceptable soiling during operation and storage!
The TwinSAFE Drive option card may not be used any further if it has been exposed to impermissible
contamination!
WARNING
Have soiled components checked!
Cleaning of the TwinSAFE Drive option card by the user is not permitted!
Please send soiled terminals to the manufacturer for inspection and cleaning!
3.3 Decommissioning
DANGER
Serious risk of injury!
Disconnect the servo drive from the mains and system voltage before removing the
TwinSAFE drive option card!
Due to the DC link capacitors, there may still be a potentially lethal voltage on the DC
link contacts X02 even after disconnecting the servo drive from the mains supply. Wait
5 minutes after disconnection and measure the voltage on the DC link contacts DC+
and DC-. The device is safe once the voltage has fallen below 50 V.
3.3.1 Disposal
In order to dispose of the device, it must be removed and fully dismantled.
•
Metal parts can be sent for metal recycling.
•
Electronic parts such as disk drives and circuit boards must be disposed of in accordance with
national electronics scrap regulations.