BECKHOFF AX570x - Manual (Page 4)

Seite 4/4
Scaling
Overview of socket X41 (channel A) and jumper configuration
Socket X41
Pin Renishaw In “C” In “E”
1 Alarm (+) X (+)
2 GND_5 V
3 Limit switch X
4 U
S
_5 V
5 B+
6 n.c.
7 REF Z
8 A+
9 Alarm (-) X (-)
10 GND_Sense
11 n.c.
12 U
S
_5 V Sense
13 B-
14 Z
15 A-
Notes on the documentation
This description is only intended for trained specialists in control, automation and drive engineering who are familiar with the applicable national
standards. It is essential that the following notes and explanations are followed when installing and commissioning these components. The
responsible staff must ensure that the application or use of the products described satisfy all the requirements for safety, including all the relevant
laws, regulations, guidelines and standards.
Disclaimer
The documentation has been prepared with care. The products described are, however, constantly under development. For this reason, the
documentation may not always be have been fully checked for consistency with the performance data, standards or other characteristics described.
In the event that it contains technical or editorial errors, we retain the right to make alterations at any time and without warning. No claims for the
modification of products that have already been supplied may be made on the basis of the data, diagrams and descriptions in this documentation.
Copyright
© Beckhoff Automation GmbH
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization
are prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.
Scope of supply
The scope of supply includes the following components:
Optional encoder card AX570x, technical documentation and packaging
If one of the components is damaged please notify the logistics company and Beckhoff Automation GmbH immediately.
Jumper configuration