Belshaw Adamatic HI18 Econo-Icer - Manual (Page 15)

If you accept the machine from the shipping
company, you are, in effect, saying that the
machine is in good condition, and you must
pay for the machine. The freight company has
accepted responsibility for the safe delivery of
our machines. For your protection, inspect the
machine to see that no parts are bent, scratched,
or otherwise damaged. If any damage has
occurred in shipping, file a freight claim with the
shipping company immediately. To transport the HI Econo Icer to the workstation
and unpack it follow the steps listed below:
1. Use a fork lift or pallet jack to transport the
shipping crate to workstation.
2. Break down the shipping crate.
3. Remove all the packing materials from the
HI Econo Icer, including foam, tape, brown
paper, plastic, and white protective coating.
IMPORTANT
Keep this manual for future reference.
EQUIPMENT RECORD
Please provide the information below when you correspond with us about your machine.
Purchased by ______________________________________________________________________
Installed by _______________________________________________________________________
Date of installation __________________________ Model number _________________________
Serial number ______________________________________________________________________
021709
MN-1748EN
Belshaw Bros., Inc.
814 44 th Street NW, Suite 103
Auburn, WA 98001 USA
Phone: (206) 322-5474 • Fax: (206) 322-5425
Email: [email protected] • http://www.belshaw.com