Daewoo DR-C913B - Manual (Page 14)

13
Installation
¥ VHF: 2 ~13 channels of TV, UHF: 14~69 channels of TV, CATV: Broadcasting is transmitted with cable from
broadcasting station by contract with the station and consumers. It does not need any antenna.
¥ In/Out jack in Audio/Video terminal: - In: A jack used to receive signal required in this unit from other units.
- Out: A jack used to send signal of this unit to other units.
¥ Connect with Audio/Video terminal, you can enjoy more clear video and audio. (Use [INPUT] button in this remote
control to select video mode.)
¥ If screen is broken in connecting COMPONENT Out to Pr, Pb, Y of TV COMPONENT In jack , connect to Cr, Cb, Y.
Method Method
4 4
: Connecting to a TV that has a S-Video in jacks
Use a S-Video cable (not supplied) to enjoy higher quality pictures.
Connecting with TV
DR-C91/92D1N-BS 04.1.19 9:51 PM ˘ ` 13