Beurer HK 72 - Manual (Page 11)

11
• Cleaning and user maintenance must not be performed by children
unless supervised.
• This heating pad is not designed for use in hospitals.
• Do not insert needles.
• Do not use when folded or bunched up.
• Do not use if wet.
• This heating pad may only be used in conjunction with the battery
pack specified on the label.
• To charge the battery pack, you must use only the provided charger
type RSS1002-101084-W2E
• The electrical and magnetic fields emitted by this heating pad may
interfere with the function of a pacemaker. However, they are still well
below the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla.
Please consult your doctor and the manufacturer of your pacemaker
before using this heating pad.
• Do not pull, twist or make sharp bends in the cables.
• Please check this heating pad frequently for signs of wear and tear
or damage. If you detect signs of improper use of the heating pad,
then this must be inspected by the manufacturer before switching on
again.
• If the cables of the heating pad or the charger are damaged, they
must be replaced by the manufacturer, its customer service depart-
ment or a similarly qualified person to avoid any risk.
• When this heating pad is switched on:
–
Do not place any objects on it (e.g. suitcase or washing basket).
– Heat sources, such as hot water bottles, heating pads or similar,
must not be placed on the pad.
• While charging, do not cover the battery pack with covers, cushions
or similar items.
• Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).
• If you should have any questions about using our devices, please
contact Customer Services.
3. Intended use
IMPORTANT
This heating pad is only designed to warm up the human body.