Beurer HK 72 - Manual (Page 13)

13
4.5 Switching on
Switch on the heating pad by pressing the button for controlling ON/OFF and temperature settings (8).
The blue LED display for temperature setting 1 lights up. Press the button repeatedly to increase the tem-
perature setting.
The corresponding blue LED displays for the temperature settings (6) light up. Press the button again to
switch off the heating pad.
Switching sequence: 1, 2, 3, 4, OFF, 1, ……
When switched on, the blue LED display for the temperature settings is lit up.
NOTE
The fastest way to warm up the heating pad is to initially set the highest temperature setting.
NOTE
This heating pad has a fast heating function, which allows the heating pad to warm up quickly in the
first 10 minutes.
WARNING
If the heating pad is being used over several hours, we recommend that
you set the lowest temperature setting on the battery pack (2) to avoid
overheating the heated body part, which may lead to burns to the skin.
NOTE
When the battery pack (2) has been almost completely run down, the heating pad is switched off
automatically to protect the battery pack. The battery pack must then be charged.
4.6 Setting the temperature
Setting 1: minimum heat
Setting 2 – 3: medium heat
Setting 4:
maximum heat
4.7 Switching off
Press the button for controlling ON/OFF and temperature settings (8) to switch off the heating pad. The
switching sequence is 1 – 2 – 3 – 4 – OFF … The blue LED display for the temperature settings (6) goes out
when the heating pad is switched off.
NOTE
Please note that the battery pack must be protected against extreme cold (such as being placed under
clothing) to maintain its performance.
4.8 Automatic switch-off time
This heating pad is equipped with an automatic switch-off function. This turns off the heat supply approx. 90
minutes after the initial use. The blue LED display for the temperature settings (6) is no longer lit up after this.
You can switch the heating pad on again immediately by pressing the button for controlling ON/OFF and
temperature settings (8). If the heating pad can no longer be switched on, then the battery pack (2) has been
run down.