Error messages/troubleshooting – Beurer BC 44 User Manual

Page 18

Advertising
background image

18

WhO classification:
In accordance with the guidelines/definitions of the World

Heath Organization and the latest findings, the measure-

ments can be classified and assessed according to the fol-

lowing table.

However, these standard values serve only as a general

guideline, as the individual blood pressure varies in different

people and different age groups etc.

It is important to consult your doctor regularly for advice.

Your doctor will tell you your individual values for normal

blood pressure as well as the value above which your blood

pressure is classified as dangerous.

Range of blood

pressure values

Systolic

(in mmHg)

Diastolic

(in mmHg)

Measure

Grade 3:

Severe hyper-

tension

>= 180

>= 110

Seek medical

advice

Grade 2:

Moderate

hyper tension

160 – 179

100 – 109

Seek medical

advice

Grade 1: Mild

hypertension

140 – 159

90 – 99

Have it checked

regularly by doctor

High normal

130 – 139

85 – 89

Have it checked

regularly by doctor

Normal

120 – 129

80 – 84

Check it yourself

Optimal

< 120

< 80

Check it yourself

Source: WHO, 1999

The bar graph in the display and the scale on the unit in-

dicate the range of the blood pressure which has been

recorded.

If the values for systolic and diastolic pressure are in two

different WHO ranges (e.g. systolic in the high-normal range

and diastolic pressure in the normal range) the graphic WHO

classification on the unit indicates the higher range (high-

normal in the example described).

6. Error messages/troubleshooting

In case of faults, the _ message appears in the display.

Error messages may appear if:

• systolic or diastolic pressure could not be measured (

or

appears on the display)

• systolic or diastolic pressure was outside the measure-

ment range (“

Hi” or “Lo” appears on the display)

• the cuff is fastened too tightly or loosely (

or

ap-

pears on the display)

• the pump pressure is higher than 300 mmHg (

appears

on the display)

• pumping up takes longer than 160 seconds (

appears

on the display)

• there is a system or device error (

,

,

or

appears on the display)

Advertising