Evaluating results – Beurer BC 58 User Manual

Page 22

Advertising
background image

22

• Before the measurement, the last saved test result is

briefly displayed. If there is no measurement in the mem-

ory, the instrument always displays the value .

• The cuff automatically inflates. Cuff air pressure is

released slowly. If a tendency towards high blood pres-

sure is already detectable, the cuff is pumped up again

and cuff pressure increased further. As soon as a heart

rate is detected, the heart rate symbol is displayed.

• After the pressure has been completely reduced, the sys-

tolic pressure, diastolic pressure and pulse readings are

displayed.

• You can cancel the measurement at any time by press-

ing the START/STOP button or by pushing the touch

screen activation button to OFF.

• appears if it has not been possible to perform the

measurement properly. Observe the section in these

instructions for use on error messages/troubleshooting

and repeat the measurement.

• The test result is saved automatically.

• To switch off the device, press the START/STOP button

or push the touch screen activation switch to OFF. If

you forget to switch off the device, it switches off auto-

matically after approx. 1 minute.

Wait at least 5 minutes before taking another measurement!

6. Evaluating results

Cardiac arrhythmia:
This instrument can identify possible cardiac arrhythmia dis-

orders during measurement and if necessary indicates the

measurement with the flashing icon

.

This may be an indicator for arrhythmia. Arrhythmia is a

condition where the heart rhythm is abnormal as a result

of defects in the bioelectrical system controlling the heart

beat. The symptoms (omitted or premature heart beats,

slow or excessively fast heart rate) may be caused, among

other things, by heart disease, age, physical predisposition,

excessive use of stimulants, stress or lack of sleep. Arrhyth-

mia can only be ascertained through examination by your

doctor.

Repeat the measurement if the flashing icon

is dis-

played after the measurement. Please note that you should

rest for 5 minutes between measurements and not talk or

move during the measurement. If the icon

appears

often, please contact your doctor. Any self-diagnosis and

treatment based on the test results may be dangerous. It is

vital to follow your doctor’s instructions.
WHO classification:
In accordance with the guidelines/definitions of the World

Health Organization and the latest findings, the measure-

ments can be classified and assessed according to the fol-

lowing table.

Advertising