Beurer MC 3000 User Manual

Page 18

Advertising
background image

18

Step 4:

Connect the power supply unit to the chair using the connector

>

plug

Plug the mains plug into a socket

>

Switch on the massage chair using the on/off button

>

on the

control element

The massage chair is now ready for operation.

Wear comfortable clothes during the massage.

•

Remove all objects from your trouser pockets (e.g.

•

keys, pocket knife, mobile phone).

Assume a comfortable, relaxed position.

•

Always sit in the middle of the seat so that your

•

spine is positioned precisely between the massage

heads.

The back cushion can be folded back during the

•

massage.

The massage should feel pleasant and relaxing

•

at all times. If the massage is painful or

uncomfortable, stop the massage or change your

sitting position.

Gently press your back against the back rest.

•
Now check whether the massage is comfortable.

Press your weight harder against the back of the

•

chair if this still feels comfortable.

If the device has not been used for a long period of

•

time, check that the device is functioning correctly

before use.

Before switching on

Warning!

Before using the device for the first time, read the

•

‘Safety notes’ section.

w

Safety notes, pages 2 and 3

Caution!

If you experience irritation of any kind, stop

•

treatment immediately.

6.

Operation

Flat position/upright position

The upright position can be adjusted

even when the massage function is

switched off.

Putting the massage chair in the flat position

Sit on the massage chair

>

Pull the straps to release the back rest

>

Push the back rest back with your back

>
This lowers the back rest and raises the leg rest at the same time.

Release the straps as soon as the desired position has been set

>
This locks the back rest again.

Putting the massage chair in the upright position

Pull the straps to release the back rest

>

Push on the leg rest with the legs and release the back rest

>
This raises the back rest and lowers the leg rest at the same time.

Release the straps as soon as the desired position has been set

>
This locks the back rest again.

Advertising
This manual is related to the following products: