Beurer MC 4000 - Manual (Page 15)

15
Massage programmes
Relax button Refresh button Therapy button
The massage chair features three different automatic massage programmes.
These automatic programmes massage your entire back with a combination of kneading, tapping, rolling and
Shiatsu massage elements. The air pressure massage can be activated or deactivated separately.
Warning!
• Keep packaging material away from children!
There is a choking hazard.
• Before using the device for the first time, read the
safety notes in the Safety section.
w
Safety, pages 11 to 12
Caution!
• The massage chair could damage your flooring.
Place a suitable, non-slip underlay under the
massage chair.
Installation location
• Install the massage chair on a sturdy and even
surface.
• Before using the device for the first time, remove all
obstacles in front of and behind the massage chair
so that the back rest can be lowered and the leg
rest raised freely.
5. Initial use
The massage chair MC4000 is delivered in a
cardboard box.
Caution!
Do not use sharp or pointed tools (Stanley knife) to
remove the packaging.
Unpacking and assembly
Step 1:
> Open the cardboard box and hold the massage chair at the
designated holding points.
> Remove the chair from the cardboard box.
Four persons are required for this.
> Carefully remove all the packaging material.