Beurer MC 4000 - Manual (Page 16)

16
Step 2:
> Unfold the back rest to the upright position until the locking
mechanism audibly engages.
The back rest now stands at approx. 115°.
Step 3:
> Remove the seat cushion.
> Connect the air hoses under the seat with the air hoses on the
seat cushion.
> Affix using the Velcro strips and ensure that the hoses are not
crossed and or kinked.
> Carefully position the seat cushion.
Step 4:
> Affix the back cushion and the neck cushion to the back of the
back rest at the top.
> Affix the Velcro fastening before closing the zip.
Step 5:
> Plug the mains plug into a socket.
> Switch on the main switch at the bottom of the rear side.
> Switch on the massage chair at the on/off button on the
controls.
The massage chair is now ready for operation.