Beurer MG 148 - Manual (Page 12)

12
Risk of fire
WARNING
There is a risk of fire if the device is used improperly or these instructions for use are ignored.
Therefore, observe the following instructions for using the Shiatsu massage belt:
• Never use the device underneath a cover, such as a blanket, pillow, etc.
• Never use the device near petrol or other highly flammable substances.
Handling
IMPORTANT
The device must be switched off and disconnected from the mains every time after use and before
cleaning.
• Do not insert any objects into the device apertures or the rotating parts. Ensure that the moving
parts can move freely at all times.
• Do not place your full weight on the moving parts of the device or place any objects on the device.
• Do not expose the device to high temperatures.
Disposal
IMPORTANT
Follow local regulations regarding the disposal of materials. Please dispose of the device in
accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any queries, please contact the appropriate local authorities.
5. Unit description
Shiatsu massage belt
1 Four massage heads (two heated and illu-
minated massage heads), rotating in pairs
2 Control element
3 button with LED indicator
4 / - buttons (anti-clockwise/clockwise
rotation of the massage heads)
5 button (heat function) with LED indicator
6 Handles
7 Mains adapter
8 Mains connection cable (cable is secured
to the side)
9 Belt extension
6. Initial use
• Remove the packaging.
• Check the device, mains part plug and cable for damage.
• Insert the connector plug into the socket on the Shiatsu massage belt.
• Ensure that the cable does not pose a trip hazard.
7. Operation
Switch on the Shiatsu massage belt with the button. The massage heads start to rotate.
You can select the massage direction by pressing the / - buttons.
3 4 5
2
9
8
6
7
1