Beurer MG 148 - Manual (Page 14)

14
If both handles are on the device, first remove the
handle on the side where the hook-and-loop fastener
is located.
Attach the belt extension as shown in the image.
8. Maintenance and storage
Cleaning
WARNING
• Always unplug the mains part from the socket and disconnect it from the device before carrying out
any cleaning.
• Clean the device using only the methods specified. Under no circumstances may liquid enter the
device or the accessory.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry
detergent where necessary. Do not use any solvent-based cleaning products.
• Do not use the device again until it is completely dry.
Storage
If you do not plan to use the device for a long period of time, we recommend that you store it in the original
packing in a dry environment, ensuring it is not weighed down by additional items.
9. What if there are problems?
Problem Cause Solution
Massage heads rotating
too slowly.
The load on the massage
heads is too great.
Free up massage heads.
Massage heads do not
move.
The device is not con-
nected to mains power
supply.
Connect the mains adapter and switch on the
device.
Belt does not fit correctly. Belt length is too short. Attach the belt extension to the device.
10. Technical specifications
Device dimensions (W/H/D) ≈ 124 x 14 x 10 cm
Belt extension dimensions ≈ 39.5 x 7 x 0.5 cm
Weight ≈1230 g
Nominal power 12 W
Nominal voltage 100 – 240 V ~50/60 Hz