Beurer MG 230 - Manual (Page 11)

11
5. Appliance description
Shiatsu massage pillow (front)
1 Protective cover
2 Neck pillow
3 Four massage heads
4 Carrying handle
5 Connecting coupling
6 Power supply unit with plug connector and
power cable
7 Hand switch
8 Storage bag
Hand switch
1 Button
2 FULL BACK button (entire back massage)
3 UPPER BACK button (upper back massage)
4 LOWER BACK button (lower back massage)
5 HEAT button (heat)
6 SPOT buttons (localised massage)
7 SHIATSU button (Shiatsu massage)
8 ROLLING button (rolling massage)
9 DEMO button
6. Start-up
CAUTION
• IMPORTANT: Before using the device for the first time ensure you have released the transport
lock for the massage mechanism. To do this, remove the screws using the tool provided on
the rear of the massager. If the transport lock screws are not first removed and the device is
used straight away, the device will become irreparably damaged and unusable. The warranty
will not apply in this instance.
• Reuse the transport lock screws when transporting the device in the future. Transporting
the device without using the transport lock could cause irreparable damage to the device.
• Secure the protective cover over the surface of the device using the Velcro strips. It is also possible
to use the massager without the protective cover. This is generally considered to be a “harder”
massage.
• Position the massager on a level surface. Ensure that the entire device is resting flat.
• Connect the power supply with the device using the connector plug.
• Connect the device to the mains by plugging the plug into the socket.
2
3
4
5
6
7
8
1
1
2
3
4
5
6
7
8
9