Beurer MG 230 - Manual (Page 13)

13
• The removable cover is machine-washable at 30 °C. Please follow the cleaning and care symbols
on the label which is sewn into the cover.
• Do not use the device again until it is completely dry.
Storage
To store the device, simply fold it and then fasten the device with the Velcro fastener. Next, store the cushion
in the pocket on the rear of the device.
If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry
place without weighting it down.
CAUTION
• If you use the screw for transport locking, take care when using the device again that it is definitely
removed before switching on.
9. In the event of problems
Problem cause Remedy
Massage heads
rotating at
reduced speed.
The load on the massage
heads is too great.
Take note of the maximum weight capacity.
Massage heads
only rotate in the
upper or lower
region.
The massage has been
activated for the limited
region.
Press the FULL BACK, UPPER BACK or LOWER
BACK buttons to change the massage region.
Massage heads
not moving.
Appliance not connected to
the power supply.
Connect the plug to the mains supply and switch
on the appliance.
Device not switched on. Switch the device on with .
Select the massage region.
Transport lock has not been
removed, the massage
mechanism is damaged.
Contact your authorized dealer or the service
address.
Overheating protection tripped,
device is damaged.
Contact your authorized dealer or the service
address.