Datalogic Scanning 6000 - Manual (Page 20)

16
QuickScan 6000/6000 Plus
RS-232 Interface Selection
Scan this label to enable the standard RS-232 interface (Datalogic RS-232).
SNI RS-232 Interface Selection
Scan this label to enable the SNI RS-232 interface.
RS-232 Communication Parameters
This section contains the following RS-232 communication parameters in
the order listed:
• Baud Rate
• Data Bits
• Parity
• Stop Bit(s)
• Hardware Handshaking (CTS/RTS)
• Software Handshaking (Xon/Xoff)
• ACK/NAK Options
• Intercharacter Delay
Go to the sections titled Symbology Selection and General Features in the
back of this programming guide if you want to change any other settings
for this interface.