Beurer LB 50 - Manual (Page 16)

14
4 S
TART
-
UP
Unpacking
• Check contents: If any parts are missing,
please contact your authorized dealer.
• Remove all packaging and transport
locks.
Clean before using for the first time
For reasons of hygiene, we recommend
rinsing the humidifier, water tank and pad [4]
thoroughly with cold water before using for
the first time. Proceed as described in
Chapter 6 'Care', in the section on 'Cleaning
the Appliance', page 17.
Humidifier placement
Caution
Place the appliance so that the steam
nozzle is not pointing directly at a wall.
The exiting moisture might otherwise
cause damage to walls, particularly to
wallpaper.
• Place the humidifier on a firm, even,
water-resistant surface.
• Position the mains cable [14] so that the
appliance cannot be knocked over.
Connecting mains cable
WARNING
• Before putting the appliance into
operation, make sure that the cable [14]
is not damaged. Never operate the
appliance if the mains cable is
damaged.
• The appliance may only be operated
with the voltage indicated on the rating
plate.
Connect your humidifier to the mains by
plugging the mains plug [14] into the wall
socket.
Filling the tank
Before using the appliance for the first time,
the tank must be filled. See Chapter 5
'Operation', in the section on 'Filling the
Tank' (page 15).