Base fitting - concrete floor – Blu Bathworks TSP511 User Manual
Page 3
Advertising
![background image](/files/776246/content/doc003.png)
2013-07
1 866 907 0122 blubathworks.com
®
2
INSTALLATION
Base Fitting - Concrete Floor
•
Place the base (2) of the column on the floor. Mark hole locating support.
•
Drill the floor with the references of the holes of the floor base.
•
Insert the screw anchors (7) into the floor, position the base (2) and fit the screws (8).
•
Insert the flexible pipes (1) into the base (2).
•
Tighten the nuts of flexible pipes (1) to water supply pipes into the floor before installing.
The nut of hot water connection is painted red.
•
Engage the body (5) on the base (2) and fix with the grub screws (6).
•
Lower the cylindrical cover (9) and insert it in the seat of the base (2).
Advertising