Blu Bathworks TSP511 - Manual (Page 8)

2013-07
1 866 907 0122 blubathworks.com
®
7
MAINTENANCE
Cleaning Filters
If the flow is insufficient, the filters set in the inlets before the check-valves could be obstructed by lime-
stone or dirt. In this case, proceed as follows:
•
Before disassembling the body (2) follow the instructions “INLETS CLOSURE” then remove the two
grub screw (1).
• Unscrew the connections (3) with an allen key 10mm / ¼”.
• With pliers remove the check valves (4) and the filters (5).
• Clean them and re-install the filters and the check valves in to the body, screw the connections and fix
the body (2) with the grub screws (1).