Blu Bathworks TSP511 User Manual
Page 4
2013-07
1 866 907 0122 blubathworks.com
®
3
INSTALLATION
Base Fitting - Wooden Floor
Note: Blu recommends adding additional wood blocking under subflooring to support this
fixture on wooden floors.
Note: Screw fixing kit is not supplied for wooden floor installation.
•
Place the base (2) of the column on the floor. Mark hole locating to support.
•
Drill the floor with the references of the holes of the floor base.
•
Insert the flexible pipes (1) into the base (2).
•
Tighten the nuts of flexible pipes (1) to water supply pipes into the floor before installing.
The nut of hot water connection is painted red.
•
Engage the body (5) on the base (2) and fixing it with the grub screws (6).
•
Lower the cilindrical cover (9) and insert it in the seat of the base (2).
FLOOR BLOCKING:
Wooden Floors
•
1A: Floor Finish
•
2A: Subfloor
•
3A: Additional Wood Blocking
Floor
H
C
Joist
1A
2A
3A