Blu Bathworks TEP431 - Manual (Page 13)

2013-12
1 866 907 0122 blubathworks.com
®
12
Step 11 Step 12
Step 13
Re-insert the outlet connectors retaining bolt.
Connect the data cable from the on-off/temperature
control to the ‘TLI’ port in the control box.
Attach the supplied NPT adaptor pipework to
the outlet connectors.
Make a note of which pipe goes to which outlet.
Note: Make sure that the pipework is perpendicular to
the control box so that there is no strain on the fittings,
use pipe clips as required.
Run a pipe from the mixed water outlet on the control
box through the wall to the proposed position of the
shower hose outlet etc.
15V
Battery
Battery
TLI
AUX
15V Battery