Blu Bathworks TEP431 - Manual (Page 6)

2013-12
1 866 907 0122 blubathworks.com
®
5
a
Step 4
Cut down the bracket collars as marked.
b: Position the adaptor rings inside the
plate and fix through the adaptor ring
holes into the bracket collar using 15mm
screws supplied (manually.)
Note: Do no use an electric drill. c: Position and fix the trim plate in
position on the wall before tightening
the four screws.
a: Install the supplied
seal on the back of the
trim plate.
adaptor ring
Step 5
a. b.
c.
c