BrightSign BrightAuthor User Guide v.4.1.1 - Manual (Page 35)

27 Chapter 2 – Setting up BrightSign Players
b. Use Proxy: Check this box if you want the player to connect using a proxy server. Type the address and
port number of the proxy in the fields below. If you need to provide a user name and password, use this
format:
<user name>:<password>@<proxy server address> (e.g. “admin:[email protected]”).
5. Specify the following in the Wired and Wireless tab of the Advanced Network Setup window:
a. Data Types Enabled: Use these checkboxes to determine the types of data that will be downloaded using
the connection.
b. Connection Settings: Indicate whether the IP address is auto-generated (via DHCP) or static. If you’re
using a static IP address, enter the parameters in the fields below.