BrightSign HD120 Hardware - Manual (Page 11)

BrightSign HD120, HD220, HD1020
8
All information provided in this reference manual applies to products under development. The characteristics and specifications of these products are subject to
change without notice. BrightSign assumes no obligation regarding future manufacturing unless otherwise agreed to in writing. © BrightSign LLC, 2012
Ethernet
The BrightSign HD220 has a standard RJ45 connector for 10/100 base-T Ethernet. The maximum length for the Ethernet
cable is 100 meters. The following table illustrates the pinout of the RJ45:
pin Description pin Description
1 TX+ 2 TX-
3 RX+ 4 RC to ground
5 RC to ground 6 RX
7 RC to ground 8 RC to ground
USB
The HD1020 has a high-speed (480 Mbit) USB host port. The maximum length for the USB cable is 5 meters. The
following table illustrates the pinout of the USB host port.
pin Description pin Description
1 VBUS 2 D-
3 D+ 4 Ground
DE15 VGA Connector
The VGA connector is able to output RGB video. The following table illustrates the pinout of the DE15 VGA connector: