Broadata Communications LBC-H/V-T-WP - Manual (Page 5)

LBC-H/V-T-WP User’s Manual
Link Bridge
TM HDMI/VGA Wall Plate Transmitter System
Broadata Technical Support, (800) 214-0222 6
2.0 OPERATION CONTROLS AND FUNCTIONS
1. VGA Input: Connect to VGA source.
2. LED for VGA: LED blinking means there is VGA signal input;
LED always on means current output is VGA.
3. LINK LED for HDBT connection: LED blinking means
CAT-5e/6 cable connection available; LED always on means
there is videosignal input and output.
4. Analog Audio Input: Connect to audio source.
5. LED for HDMI: LED blinking means there is HDMI signal input;
LED always on means current output is HDMI.
6. HDMI Input: Connect to HDMI source.
7. Signal Switch Button: Manual selection of the input signal.
Figure 2-1
LBC-H/V-T-WP Front Panel