BSS Audio FCS-960 Owner's Manual - Manual (Page 7)

7
4.0 Connections
Unpacking
Warranty
Warning
Before connecting your unit to its AC power source, check that the
voltage selector switch located on the rear panel is correctly set.
See figure 2.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are colour coded in
accordance with the following code:
Green and yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the
terminal in the plug which is marked with the letter 'E' or by the earth
symbol , or coloured green and yellow.
The wire which is coloured blue must be connected to the terminal
which is marked with the letter 'N' or coloured black.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter 'L' or coloured red.
Those units that are supplied to the North American market will have an
integral moulded 3 pin connector which is provided to satisfy the area
safety standards.
Fig. 2 Mains Voltage
Switch and Fuse