BSS Audio FDS-334T Owner's Manual - Manual (Page 24)

2 4
LCR 2 way mode (FDS-336T only)
When using a derived centre cluster feed such as in LCR (Left, Centre, Right) installation, the
configuration can be changed to a 3 channel 2 way configuration, where the center channel is a
sum of A and B.
• Outputs 1 and 4 are routed from Input A.
• Outputs 3 and 6 are routed from Input B.
• Outputs 2 and 5 will be routed from Input sum A+B.
• All delay linking defaults to off.
• Stereo Link will be switched on.
• Band Names will be set to ‘Low’ and ‘High’.
Utilities Configuration
A 3 Channel 2 Way system